Bathroom Lights Zone 1

Regulations are very strict as to which lights you are able to use in a bathroom and to complicate matters bathrooms have different zones which determine what type of light you may use within that zone. Any fitting used in this zone must have a minimum rating of ipx4 which means it is protected against water spray from all directions. In this zone a minimum rating of ip44 is required.

kitchen with wood floors kitchen with white floor tiles kitchen with large island kitchen with walnut cabinets kitchen with cooktop in island kitchen without tiles kitchen with granite backsplash kitchen with apron sink

Zone 1 Bathroom Lights Bathtub Ideas

Zone 2 Bathroom Lights Bathroom Lighting Bathroom Light

Bathroom Lighting Lighting Zone Diagram Bathroom Lighting

Bathroom Lighting Zones Uk With Wonderful Inspiration Eyagci Com

Ip Ratings In Damp Areas With Images Bathroom Lighting

Bathroom Lighting Zones Inspyer Lighting

Its also worth noting that most shower lights are rated at ip65 in any case.

Bathroom lights zone 1. If the fitting is 240v a 3oma residual current device rcd must also be used to protect the circuit in this zone. Zone 1 is the area above the bath or shower to a height of 225m from the floor. This is the area.

Zone 1 is for use inside a shower cubicle and around a bath and has a minimum ip rating of ip65 zone 2 is for use on the wall up to a height of 225m again having a minimum ip rating of ip44. Zone 1 is the area above the bath to a height of 225m from the floor. All our bathroom lighting is ip44 rated or higher making them safe for bathrooms the bathroom is divided into zones 0 1 2 and 3 and bathroom light fittings are ip rated depending on where they are to be sited within the bathroom.

Lighting in the bathroom is important. In this zone a minimum rating of ip45 is required but it is generally accepted that ip65 is to be used. Zone 1 is the area above the bath or shower tray to a height of 225m from the floor.

An ip65 rating is recommended. Why do bathroom lights have an ip rating. In this zone a minimum rating of ip44 is required.

Zone 0 this zone requires a minimum of ipx7. Zone 0 bathroom lights are for the inside of the bath or shower itself. Zone 2 same as above requires a minimum of ipx4.

Zone 1 requires a minimum of ipx4. Any fitting used in this zone must be low voltage max 12v and be rated at least ip67 which is total immersion proof. If the fitting uses a 240v supply a 30ma residual current device rcd must also be used to protect the circuit in this zone.