Tiling A Kitchen Countertop

Lately tile kitchen countertops are starting to look surprisingly modern.

Tiling a kitchen countertop. Transfer the measurements to the plywood and cut it with a circular saw and a straightedge guide for a clean even cut. If theres any old tile on the countertop youll need to remove it as well as any sinks stoves or other obstacles in your way. Some tile stores carry special tiles that will wrap around the front edge but the selection will be limited.

If possible dont try to tile around the obstaclesitll look unprofessional. If you choose to go ahead first rough up the laminate with 100 grit. Dry fit the tiles by drawing perpendicular lines in the corner of the countertop using the front edge as a guide.

Even better anyone with basic do it yourself skills can install some tile. Finally allow the mortar to set overnight and then in the morning use a rubber float to press grout into the grout lines. This is one of their more distinctive and color rich tiles color blox which they describe as having colors such as deep red and midnight blue and including proprietary cross sheen finish that repels dirt and stains this is a wonderful tile that would fit just right in a.

If your counter has curved edges as most do youll have to grind off the raised bead at the lip with a belt sander and you wont be able to tile the backsplash without cutting off the curved top edge. This will provide you with the starting point for the tiles. A laminate countertop is an acceptable base for ceramic tile but think carefully before you attempt it.

Next use a tile cutter as you go to fit individual tiles to any irregular edges. Once a kitchen staple throughout the 70s 80s and 90s these days thrifty homeowners see tile as an affordable alternative to more expensive counter materials such as quartz marble and granite. Then lay the tile in place push it firmly into the mortar and use vinyl spacers to account for the grout lines.

If you have frameless cabinets measure to the front just behind the doors or drawer fronts. Kitchen countertops countertops kitchen masonry and tiling installing countertops kitchen tile installing tile step 1 apply the thin set to attach the backer board to the counter mix the modified thin set to manufacturers specifications and apply it to the plywood with a notched trowel. With the old countertop stripped completely off and the wall behind in good condition measure your cabinets from the back wall to the front edge of your face frame.